Multitom Rax with 
True2scale Body ScanGet precise, biplanar, full-body images for high diagnostic confidence

On Multitom Rax, True2scale Body Scan¹ lets you acquire a full-body scan in two planes, providing a.p. and lateral corresponding views in a single run.² The generous scan range of up to 190 cm (lying) and 170 cm (standing)⁵ makes it possible to assess the patient’s complete body axis.

Patients with very pronounced scoliosis are difficult to position correctly. Repositioning is uncomfortable, especially for patients who are anxious. True2scale Body Scan¹ allows images without repositioning the patient. It can scan deformities – a.p. and lateral images of full spine – in under 14 seconds¹.

True2scale Body Scan¹ lets you perform a post-op positional check of the prosthesis in only 6 to 10 seconds. The scan requires no stitching and no calibration. You can acquire a long-leg image to assess a patient’s body axis, bow legs, or knock knees with a large field of 120*34 cm.

True2scale Body Scan¹ offers trajectories for patients in natural, weight-bearing position and lying on the table. This allows for realistic orthosis check-ups in the position they need to be worn: standing or seated for day orthoses, supine for night orthoses.

With True2scale Body Scan¹, images appear in true 1:1 scale – in two corresponding planes. As a result, spinal and vertebral parameters, lower limb axis lengths and angles, and other relevant clinical factors can be quantified precisely. This supports higher measuring accuracy and better identification of patient deformities.

The beam collimation inherent in the True2scale slot scanning² technology helps you lower dose for your most vulnerable patients, e.g. young patient undergoing surgical treatment for skeletal deformities.

Analysis of the sagittal balance and measurement of the scoliosis as part of the preparation for the operation. True2scale Body Scan¹ was chosen because it offers the possibility of a minimized distortion² examination of the entire spine upright in the natural weight-bearing state.

Analysis of the sagittal balance as part of surgical planning. True2scale Body Scan1 was chosen because it avoids distortion² and can acquire the entire spine upright, in natural weight-bearing position.

On Multitom Rax, True2scale Body Scan¹ lets you acquire a full-body scan in two planes, providing a.p. and lateral corresponding views in a single run.² The generous scan range of up to 190 cm (lying) and 170 cm (standing)⁵ makes it possible to assess the patient’s complete body axis.