- Home
- Billeddiagnostik
- Magnetisk resonans (MR)
- Coils
- Peripheral Angio 36
Peripheral Angio 36
36-channel design with SlideConnect® technology for easy coil set up. With a length of about 1m both legs are covered from the iliac artery level down to the foot arch vessels using multiple, flexible wings. For the visualization of the abdominal aorta and the iliac bifurcation it can be combined with the Body 18 and Spine 32. For larger body coverage, it can be combined with Head/Neck 20 or a further Body 18 to allow for large Field of View examinations with high patient comfort.
Features & Benefits
General
- 36-channel design with 36 integrated preamplifiers, distributed over 6 planes with 6 elements each
- Operates in an integrated fashion with Body 18 coils and with the Spine 32 and for whole-body examinations also with the Head / Neck 20
- Can be utilized head and feet first
- Both legs are independently covered with coil elements, maximizing the coil filling factor and the signal-to-noise ratio
- No coil tuning
- iPAT-compatible in all directions
- Dual-Density Signal Transfer enables ultra-high density coil designs by integrating key RF components into the local coil
- SlideConnect® technology for easy coil set up
- One cable only for easy handling
Applications
- High resolution angiography of both legs with highest signal-to-noise ratio
- Bilateral examinations of long bones of the legs
Typically combined with
- Head / Neck 20
- Body 18
- Spine 32
- Flex Large 4
- Flex Small 4
Technical Data
- Dimensions: 860 mm × 300 – 640 mm × 280 mm (L × W × H)
General Requirements
System
- MAGNETOM Vida
- MAGNETOM Skyra eco
- MAGNETOM Aera
- MAGNETOM Spectra
- MAGNETOM Prisma
- MAGNETOM Skyra
- MAGNETOM Altea
- MAGNETOM Lumina
- MAGNETOM Sola
Minimum Software Version
syngo MR D11
Other
Also available for:
MAGNETOM Avantofit
MAGNETOM Prismafit
MAGNETOM Skyrafit
MAGNETOM Solafit
MAGNETOM Vidafit
Please Note: Additional technical pre-requisites may apply. Upon receiving your request, your local Siemens representative will clarify whether your system meets the requirements.