Operates in an integrated fashion with the BioMatrix Spine 323 or BioMatrix Spine 723 for body imaging
The Beat Sensor is seamlessly integrated into the BioMatrix Body 18
Can be combined with further BioMatrix Body 18 coils for larger coverage
No coil tuning
iPAT-compatible in all directions
Dual-Density Signal Transfer enables ultra-high density coil design by integrating key RF components into the local coil
SlideConnect® technology for easy coil set up
Exchangeable cable design allows a single coil to be used with either a standard-sized cable (95 cm length, standard) or a longer version (165 cm length, available as an option)
Applications:
Thorax
Heart
Abdomen
Pelvis
Hip
Vascular
Possible Combinations:
Combination possible with all receive-only coils, e.g.:
Dimensions: • Coil2: 415 mm × 619 mm × 65 mm (L x W x H) • Cable: 950 mm (70 cm longer compared to the Body 18) • Cable long1: 1650 mm
Weight: • Coil2: 1100 g • Cable: 570 g • Cable long1: 850 g
General Requirements
System
MAGNETOM Sola
MAGNETOM Sola Fit
MAGNETOM Vida
MAGNETOM Vida Fit
Minimum Software Version
syngo MR XA20
Other
Please Note: Additional technical prerequisites may apply. Upon receiving your request, your local Siemens representative will clarify whether your system meets the requirements
Also referred to BM Body 18; Optional or available as alternative Standard
2
The Beat Sensor is designed for automatic cardiac triggering. The Cardiac Triggering functionality is still under development and not commercially available yet. Its future availability cannot be ensured. The Cardiac Triggering functionality is planned to be activated with a future software update.