CT-guided interventionsInnovative CT solutions for efficient procedure planning and needle guidance
CT-guided interventions are always critical and require great accuracy and efficiency. Modern CT scanners and advanced technologies can help the radiologist position the needle safely and reach the target area faster and with greater precision – even in challenging procedures with double angulated access paths.
Avez-vous jugé cette information utile?
The products/features and/or service offerings (mentioned herein) are not commercially available in all countries. Their future availability cannot be guaranteed.
The statements by Siemens Healthineers’ customers described herein are based on resultsthat were achieved in the customer's unique setting. Because there is no “typical” hospital or laboratoryand many variables exist (e.g., hospital size, samples mix, case mix, level of IT and/or automationadoption) there can be no guarantee that other customers will achieve the same results.
Professor Frank Wacker, MD and Professor Ralf Bauer, MD receive financial support from Siemens Healthineers for collaborations.
Professor Frank Wacker, MD and Professor Ralf Bauer, MD receive financial support from Siemens Healthineers for collaborations.
1
Genshaft S, et al. (2021): SIR Quality Improvement Standards on Percutaneous Ablation of Non-Small Cell Lung Cancer and Metastatic Disease to the Lungs.
2
Reig M, et al. (2022): BCLC Strategy for Prognosis Prediction and Treatment recommendation.
3
Siemens Healthineers evaluation based on Clarivate: Interventional Oncology Devices Market Insights, 2021.
4
De Filippo, M, et al. (2021): CT-guided percutaneous drainage of abdominopelvic collections: a pictorial essay.
5
Wu A, et al. (2017): Global low back pain prevalence and years lived with disability from 1990 to 2017: estimates from the Global Burden of Disease Study 2017.
6
Option. Not available for SOMATOM go.Now.
7
Option. Only available with SOMATOM X.cite, SOMATOM X.ceed, and NAEOTOM Alpha and in combination with myNeedle Guide 3D.
8
Only in combination with myNeedle Guide 2D or myNeedle Guide 3D
9
Hohl C, Suess C, Wildberger JE, Honnef D, Das M, Mühlenbruch G, et al. (2008): Dose reduction during CT fluoroscopy: Phantom study of angular beam modulation.
10
iMAR is designed to yield images with a reduced level of metal artifacts compared to conventional reconstruction if the underlying CT data is distorted by metal being present in the scanned object. The exact amount of metal artifact reduction and the corresponding improvement in image quality achievable depends on a number of factors, including composition and size of the metal part within the object, patient size, anatomical location and clinical practice. It is recommended to perform iMAR reconstruction in addition to conventional reconstruction.