CS-2500 system with Computer

CS-2500 SystemAdvance your hemostasis testing with confidence

Features & Benefits

Compact yet powerful, the  CS-2500 System utilizes innovative smart-design PSI™ technology to maximize efficiency and ensure high-quality first-run results. Designed to reduce costs, optimize workflow, and maximize operating efficiency, the CS-2500 System delivers:

  • Confidence, with simultaneous multiwavelength PSI technology designed to minimize the effects of preanalytical errors, leading to more accurate patient results
  • Lab-to-lab consistency for multisite patient monitoring, with sample result traceability for in-depth audit capabilities and sophisticated cap-piercing technology
  • High-capacity performance with extended walkaway time to free up valuable tech time and increase operating efficiency
  • Operational efficiency in a compact, cost-efficient footprint, with a wide spectrum of assay parameters—enabled by four measurement principles—all on one analyzer
  • Uninterrupted workflow, with flexible sampling capabilities, seamless testing for improved throughput and maximum productivity, and minimal downtime and maintenance
  • Simultaneous multiwavelength PSI technology with primary-tube sample-volume check and double aspiration clog detection identifies and automatically manages potentially problematic test samples prior to analysis, minimizing repeat testing and manual reviews.
  • Intuitive system interface helps streamline lab operations with onboard help, configurable maintenance, automated quality control checks at user-defined intervals, and real-time monitoring of reagents and consumables.
  • Identical cutoff values and results that correlate with the entire Siemens family of hemostasis systems allow standardized monitoring of patients from lab to lab.
  • Instruments, PSI technology, assays, and results are seamlessly integrated across multiple labs.
  • Standardized software, reagents, controls, and calibrators improve convenience, offer cost savings, and reduce waste for more efficient labor utilization.
  • A standardized single point of contact for all your hemostasis needs provides convenient ordering and service coordination.
  • Fully loaded reagent capacity of up to 40 reagents and 5 additional buffer or diluent positions support up to 3000 tests* onboard.
  • Flexible vial-type management enables use of multiple vials for variety of tests simultaneously.
  • System throughput is approximately 180 simultaneous PT/APTT tests/hour.*
  • Anti-evaporation caps and refrigerated reagent chamber at approximately 10⁰C maximize onboard reagent stability.
  • Vial-sampling angle provides greater usable reagent volume and number of tests per vial.
  • Smart calibration capability enables use of multiple lots of same reagents onboard.

Reaction-kinetics analysis and four measurement principles (clotting, chromogenic, immunoturbidimetric, and aggregation**) are combined on one analyzer.
The system includes data storage capacity of approximately 10,000 samples, with up to 60 results per sample.
24-inch wide-screen LCD display with touch operation and Microsoft Windows 7-based software provide easy operation.
Sample result traceability allows in-depth audit capabilities.
Wide spectrum of analysis methods such as automated reanalysis and reflex testing are packaged in a compact footprint.

  • Sophisticated cap-piercing technology supports use of various capped and/or uncapped sample tubes and cups for dependable throughput under all conditions.
  • The system supports simultaneous processing of normal and micro-mode samples.
  • Daily maintenance can be performed in less than 5 minutes* and recorded at the touch of a button.
  • Access to the reagent table while the instrument is running enables continuous loading of reagents, consumables, and samples.
  • Evaporation cap, SLD mini cup, and vial-sampling angle significantly reduce waste.

Assays

PT
Dade® Innovin®
Thromborel® S

APTT
Dade Actin FS
Dade Actin FSL

Fibrinogen
Dade Thrombin

Thrombin time
Test Thrombin

Batroxobin time
Batroxobin

Factor deficient plasma
Factor II

Factor V
Factor VII
Factor VIII
Factor IX
Factor X
Factor XI
Factor XII

Lupus anticoagulant
LA1 screening
LA2 confirmation

Protein C pathway
Protein C
Factor V Leiden
INNOVANCE® Free Protein S

Heparin
INNOVANCE Heparin

Antithrombin III
INNOVANCE Antithrombin

D-Dimer
INNOVANCE D-Dimer

Von Willebrand factor
INNOVANCE VWF Ac
VWF Ag

Chromogenic
Berichrom Factor VIII Chromogenic
Berichrom α2-Antiplasmin
Berichrom Plasminogen
Berichrom Protein C

Technical Specifications

  • Main unit:
    Approx. 775 (W) × 895 (D) × 685 (H) mm
    30.6 (W) × 35.2 (D) × 27.0 (H) in.
  • Pneumatic unit:
    Approx. 280 (W) x 355 (D) x 400 (H) mm
    11.1 (W) x 14.1 (D) x 15.7 (H) in.
  • Terminal (PC):
    Approx. 338 (W) x 381 (D) x 100 (H) mm
    13.3 (W) x 15.0 (D) x 3.95 (H) in.
  • Terminal (monitor):
    Approx. 556 (W) x 122.5 (D) x 403.5 (H) mm
    21.8 (W) x 4.8 (D) x 15.8 (H) in.

Measurement channels

  • 10 single channels for chromogenic, immunoassay, and aggregation methods
  • 10 wells (mixing function using stir bars possible for 4 wells)
  • Simultaneous five-wavelength photometry in all detector channels (340, 405, 575, 660, and 800 nm wavelengths)

Sample capacity

  • 50 samples; five racks with 10 samples per rack (maximum load)

Throughput§ (tests/hour)

  • Approx. 180 PT
  • Approx. 180 APTT
  • Approx. 180 simultaneous PT/APTT
  • Approx. 95 simultaneous PT/APTT/AT/DD (results for normal-mode processing)

Operation

  • Access mode: continuous reagent-, consumable-, and sample-loading capability
  • STAT: 5 priority positions

Reaction tubes

  • Type: Single reaction tubes
  • Loading: Automatic continuous access, 500 reaction tubes onboard

Data storage

  • Approx. 10,000 samples with a maximum of 60 results per sample

Operating System

  • Microsoft Windows 10
Subscription Button Icon
Be the first to know about our events, training, and news